The following table describes the parameters and buttons of this page:
Field
Description
Protocol
It displays the protocol type used for this WAN
connection.
ATM VCC
The ATM virtual circuit connection assigned for this PPP
interface (VPI/VCI).
Login Name
The user name provided by your ISP.
Password
The password provided by your ISP.
Authentication
Method
You can choose
AUTO
,
CHAP
, or
PAP
.
Connection Type
You can choose
Continuous
,
Connect on Demand
, or
Manual
.
Idle Time (s)
If choose
Connect on Demand
, you need to enter the
idle timeout time. Within the preset minutes, if the router
does not detect the flow of the user continuously, the
router automatically disconnects the PPPoE connection.
Bridge
You can select
Bridged Ethernet
,
Bridged PPPoE
, or
Disable Bridge
.
AC-Name
The accessed equipment type.
Service-Name
The service name.
802.1q
You can select
Disable
or
Enable
. After enable it, you
need to enter the VLAN ID. The value ranges from 0 to
4095.
Apply Changes
Click it to save the ettings of this page temporarily.
s
Return
Click it to return to the
Channel Configuration
page.
Undo
Click it to refresh this page.
3
Click
ing
in the
this
page,
configure
rs of the ATM, including QoS, PCR, CDVT, SCR,
and M
.4.2.2
etting
ATM S
ATM Sett
you can
left pane, the page shown in the following figure appears. In
the paramete
BS.
36