Planet 802.11n Wireless PCI Adapter WNL-9330 User Manual Download Page 7

Page: 7 / 61

1-2 Safety Information

In order to keep the safety of users and your properties, please follow the safety instructions:

1. This PCI wireless network card is designed for indoor use only. DO NOT expose this

network card to direct sun light, rain, or snow.

2. DO NOT put this network card at or near hot or humid places, like kitchen or bathroom. Also,

do not left this wireless network card in the car in summer.

3. This network card is small enough to put in a child’s mouth, and it could cause serious injury

or could be fatal. If they throw the network card, the card will be damaged. PLEASE KEEP

THIS NETWORK CARD OUT THE REACH OF CHILDREN!

4. This network card will become hot when being used for long time (This is normal and is not

a malfunction). DO NOT put the network card on a paper, cloth, or other flammable objects

after the network card has been used for a long time.

5. There’s no user-serviceable part inside the network card. If you found that the network card

is not working properly, please contact your dealer of purchase and ask for help. DO NOT

disassemble the network card by your self, warranty will be void.

6. If the network card falls into water, DO NOT USE IT AGAIN BEFORE YOU SEND THE

CARD TO THE DEALER OF PURCHASE FOR INSPECTION.

7. If you smell something strange or even see some smoke coming out from the network card,

switch the computer off immediately, and call dealer of purchase for help.

Summary of Contents for 802.11n Wireless PCI Adapter WNL-9330






























































Search results

Summary of Contents for 802.11n Wireless PCI Adapter WNL-9330

Reviews:

Related manuals for 802.11n Wireless PCI Adapter WNL-9330

Brands by name

Popular brands

Planet 802.11n Wireless PCI Adapter WNL-9330, User Manual

Search results

Summary of Contents for 802.11n Wireless PCI Adapter WNL-9330

Reviews:

Related manuals for 802.11n Wireless PCI Adapter WNL-9330

Brands by name

Popular brands