manualshive.com logo in svg

Planet 802.11n Wireless PCI Adapter WNL-9330, User Manual

The Planet 802.11n Wireless PCI Adapter WNL-9330 is a high-performance networking device that offers enhanced connectivity for your desktop computer. To fully unleash its capabilities, make sure to download the user manual from manualshive.com for free. This comprehensive manual provides step-by-step guidance and valuable insights for easy installation and optimal usage.

Share
Download
background image

 

3. All access points found will be displayed. Please make sure the access point you wish to 

connect is displayed. If not, please click ‘Rescan’ few more times. You can also click 

‘Information’ button to see the detailed information about selected access point. 

 

4. Click ‘PBC’ button now to start to establish wireless connection by WPS, and please be 

patient (This may require several seconds to one minute to complete). When you see ‘WPS 

status is connected successfully’ message, it means the connection between your WNL-9330 

and access point is successfully connected by WPS, and the information about access point 

you connected to will be displayed. 

 

 

Summary of Contents for 802.11n Wireless PCI Adapter WNL-9330






























































Reviews:

No comments

Related manuals for 802.11n Wireless PCI Adapter WNL-9330

3Com AirConnect Quick Start Manual preview
AirConnect
Brand: 3Com Pages: 14
M-Audio Sonica Theater Quick Start Manual preview
Sonica Theater
Brand: M-Audio Pages: 3
Encore ENLGA-1320 Manual preview
ENLGA-1320
Brand: Encore Pages: 9
Aladdin Hardlock Installing Instruction preview
Hardlock
Brand: Aladdin Pages: 6
Hama 00051620 Operating Instructions Manual preview
00051620
Brand: Hama Pages: 26
Diamond Systems DS-MPE-GE1 User Manual preview
DS-MPE-GE1
Brand: Diamond Systems Pages: 8
WNC DCMA-81J User Manual preview
DCMA-81J
Brand: WNC Pages: 32
Kontron CP605 Manual preview
CP605
Brand: Kontron Pages: 188
Farpointe Data P-300 Quick Start Manual preview
P-300
Brand: Farpointe Data Pages: 2
Farpointe Data Delta3-OSDP Quick Start Manual preview
Delta3-OSDP
Brand: Farpointe Data Pages: 2
Broadcom BCM94352HMB User Manual preview
BCM94352HMB
Brand: Broadcom Pages: 15
BITMAIN Sophon SC1 User Manual preview
Sophon SC1
Brand: BITMAIN Pages: 7
ADLINK Technology NuPRO-900A User Manual preview
NuPRO-900A
Brand: ADLINK Technology Pages: 49
ATEN IC104SA User Manual preview
IC104SA
Brand: ATEN Pages: 11
ATEN IP8000 User Manual preview
IP8000
Brand: ATEN Pages: 107
Vision Systems VScom 100E PCIex User Manual preview
VScom 100E PCIex
Brand: Vision Systems Pages: 40
Sonnet TEMPO ATA133 Quick Start Manual preview
TEMPO ATA133
Brand: Sonnet Pages: 6
TECH FASS APS 400 NREM 76 User Manual preview
APS 400 NREM 76
Brand: TECH FASS Pages: 12

Brands by name

Popular brands

Load more brands