User’s Manual of WNRT-617
-66-
Step 2.
Select the service you want to use from the Common Service Port list. If the
Common
Service Port
list does not have the service that you want to use, type the number of the service
port or service port range in the
Service Port
box.
Step 3.
Type the IP Address of the computer in the
IP Address
box.
Step 4.
Select the protocol used for this application, either
TCP
or
UDP
, or
All
.
Step 5.
Select the
Enable
check box to enable the virtual server.
Step 6.
Click the
Save
button.
Figure 5-25
Add or Modify a Virtual Server Entry
If your computer or server has more than one type of available service, please
select another service, and enter the same IP Address for that computer or
server.
To modify or delete an existing entry:
Step 1. Click the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
Step 2. Modify the information.
Step 3. Click the
Save
button.
Click the
Enable/ Disabled All
button to make all entries enabled/ disabled.
