PLANET VIP-101T CLI configuration
- 33 -
network.
1.
: display current TOS values configurations.
2.
-rtptype
: configure TOS type of RTP packets from 0 to 7
3.
-rtcptype
: configure TOS type of RTCP packets from 0 to 7
4.
-rtpdelay
: configure RTP packets as normal delay or low delay
5.
-rtcpdelay
: configure RTCP packets as normal delay or low delay
6.
-rtpthruput
: configure RTP packets as normal throughput or high throughput
7.
-rtcpthruput
: configure RTCP packets as normal throughput or high throughput
8.
-rtpreliab
: configure RTP packets as normal reliability or high reliability
9.
-rtcpreliab
: configure RTCP packets as normal reliability or high reliability
16. [tone]
Busy tone, reorder tone, ring tone and dial tone are adjustable in VIP-101T.
In most circumstances, there is no need to change tone setting. Currently, only ring tone and
dial tone is functional in VIP-101T, busy tone and reorder tone are reserved for future use.
Syntax Description
tone -toneX LowFreq HighFreq LowFreqLevel HighFreqLevel TOn1 TOff1 TOn2 TOff2
You need to key in 8 sets of number to finish this configuration. If it is single-frequency tone,
M
Caution
Please make sure the other network peripherals are capable of ToS capability or this
command won
’
t be functional until network environment can be capable with TOS
function.
usr/config$ tone
Setup of call progress tones
Usage:
tone -toneX LowFreq HighFreq LowFreqLevel HighFreqLevel TOn1 TOff1 TOn2 TOff2
tone -print
Note:
toneX has the following possibility:
busy1 busy2 reorder1 reorder2 ringtone1 ringtone2 dialtone
Example:
tone -busy1 400 0 8 0 50 50 0 0
tone -dialtone 400 0 19 0 25 25 0 0
