Planet Networking & Communication VIP-101T, Command Line Interface Manual

Page: 17 / 47

PLANET VIP-101T CLI configuration
- 11 -
usr/config$ pbook -print
index Name IP E164
====================================================================
1 test1 210.66.155.90 5555
2 test2 vip.planet.com.tw 0
-----------------------------------------------------------------
usr/config$ pbook -print 1 1
index Name IP E164
===================================================================
1 test1 210.66.155.90 5555
-------------------------------------------------------------------
usr/config$ pbook -print 1 2
index Name IP E164
===================================================================
1 test1 210.66.155.90 5555
2 test2 vip.planet.com.tw 0
--------------------------------------------------------------------
a)
–
print
Parameter print can be used to display phone book database information. You can display
all data in phone book by adding
–
print parameter. Furthermore, you like to display a section
of data, indication parameter 'start_record' and 'end_record' can be used ( pbook
–
print
“
start index #
” “
end index #
”
). If parameter 'end_record' is omitted, only record
'start_record' will be display ( pbook
–
print
“
start index #
”
) .
Syntax Description
-print [start index #] [end index #] Display phonebook data.
Default
This command has no default value.
Example
b) -add
Parameter add is used to create a new entry in phone book table by give a name and e164
number for the Gateway / Terminal IP address.
Syntax Description
–
add name
“
X
”
ip
“
xxx.xxx.xxx.xxx
”
e164
“
X
”
)
Default