Pre-shared Key Format:
Select the Passphrase or Hax format.
Pre-shared Key:
Enter the pre-shared key for WPA. Client stations must use the same key
in order to connect with this device. Check the table below for instructions when entering
the key.
Radius Port:
Enter the port number of the authentication server. The default port number is
1812.
Radius Server IP Address:
Enter the IP Address of the authentication server.
Radius Password:
Enter the same key as the Radius server’s.
Click
"Apply Changes"
again to save the wireless security options and make the change
take effect.
Note: Please Commit/Reboot if you want to make this settings effective immediately
3.4.3 Advance Setting
These settings are only for more technically advanced users who have a sufficient
knowledge about wireless LAN. These settings should not be changed unless you know
what effect the changes will have on your Access Point.
Fragment Threshold:
The threshold (number of bytes) for the fragmentation boundary for
directed messages. It is the maximum data fragment size that can be sent. Enter a value
between 256 and 2346.
RTS Threshold:
The RTS (Request To Send) threshold (number of bytes) for enabling
RTS/CTS handshake. Data with its frame size larger than this value will perform the
RTS/CTS handshake. Set this attribute to be larger than the
maximum MSDU
(MAC
Service Data Unit) size
TURNS OFF
the RTS/CTS handshake. Set this attribute to
ZERO
TURNS ON
the RTS/CTS handshake. Enter a value between 0 and 2347.
35