![background image](http://html.mh-extra.com/html/planet-networking-and-communication/ade-3400v3/ade-3400v3_user-manual_1563899034.webp)
Following is a description of the different options:
1. Key
Length:
Select
64-bit WEP
or
128-bit WEP
to use data encryption.
2. Key
Format:
Select the
ASCII
or
Hex
format for encryption.
3. Default
Tx
Key:
Select Key 1 ~ 4 for your default Encryption Key.
4. Network Key 1 to 4:
Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit
encryption keys to fill out WEP keys box. Or enter 13 ASCII characters or 26
hexadecimal digits for 128-bit encryption keys to fill out WEP keys box. The system
allows you to type in 4 kinds of the WEP key.
Click
"Apply Changes"
to save the wireless security options and then click
“Close”
to
return the Security Setup screen.
Use 802.1x Authentication:
Enable the 802.1x Authentication and select WEP 64bits or
WEP 128bits for 802.1x authentication.
Radius Port:
Enter the port number of the authentication server. The default port number is
1812.
Radius Server IP Address:
Enter the IP Address of the authentication server.
Radius Password:
Enter the same key as the Radius server’s.
Click
"Apply Changes"
again to save the wireless security options and make the change
take effect.
WPA(TKIP) / WPA2(AES):
Wi-Fi Protected Access, encrypts data frames before transmitting over the wireless network.
WPA Authentication Mode:
Select the
Enterprise (RADIUS)
or
Personal (Pre-Shared
Key).
34