ver.11112020-00 Page 5
2. PLUG IN
NOTE!
NEVER CONNECT (HOT PLUG)
LED PUCKS to a powered driver as this
can damage LEDs.
2.1
Ensure driver is powered OFF
2.2
For each hole, plug in an RGBW Puck,
connecting male to female, and female to
male plugs.
2.3
Plug in feed cable and return cable to
driver.
NOTE!
Driver attached plugs come
pre-installed when driver is supplied by
Planet Lighting.
2.3 Plug in return cable and feed
cable
2.2 Plug in each LED Puck
INSTALLATION GUIDE
INSTALLATION
LED PUCK RGBW WIRING GUIDE
NEVER CONNECT (HOT PLUG) LED PUCKS TO A POWERED
DRIVER AS THIS CAN DAMAGE LEDS.
