manualshive.com logo in svg

Planet Lighting LED PUCK RGBW, Wiring Manual

The Planet Lighting LED PUCK RGBW brings vibrant lighting to your space. With its versatile design and ability to create a wide range of colors, this product is perfect for enhancing any environment. For detailed instructions on installation and usage, download the free wiring manual from manualshive.com.

Share
Download
background image

planetlighting.com/led-puck

ver.11112020-00      Page 7 

4.  INSERT LED PUCKS

NOTE! 

Perform this step with the driver 

OFF and power disconnected.

4.1 

Push the LED Pucks into the tube. The 

Pucks should snap firmly and securely 
into place.

4.2

 Ensure correct alignment of LED 

Pucks. If not use the Snap Fix / Removal 
tool to correct alignment, taking note to 
avoid scratching the lens.

INSTALLATION GUIDE

LED Pucks should snap firmly 
into place 

 INSTALLATION

LED PUCK RGBW WIRING GUIDE

Summary of Contents for LED PUCK RGBW









Reviews:

No comments

Related manuals for LED PUCK RGBW

GE ImageQuant LAS 4000 Original Instructions Manual preview
ImageQuant LAS 4000
Brand: GE Pages: 86
GE AKTApure Operating Instructions Manual preview
AKTApure
Brand: GE Pages: 160
GE AKTA avant Getting Started preview
AKTA avant
Brand: GE Pages: 134
Yamaha V50 Use Manual preview
V50
Brand: Yamaha Pages: 78
Fast 8200 Operation Manual preview
8200
Brand: Fast Pages: 42
DARAY V60 Manual preview
V60
Brand: DARAY Pages: 28
Haenim 3G Manual preview
3G
Brand: Haenim Pages: 2
ParaBody 875 Assembly Instruction Sheet preview
875
Brand: ParaBody Pages: 5
Baileigh Industrial TN-300 Operator'S Manual preview
TN-300
Brand: Baileigh Industrial Pages: 28
Baileigh Industrial BP-3305CNC Operator'S Manual preview
BP-3305CNC
Brand: Baileigh Industrial Pages: 56
Tascam HS-20 Owner'S Manual preview
HS-20
Brand: Tascam Pages: 128
ParaBody 842 User Manual preview
842
Brand: ParaBody Pages: 6
Haag-Streit BQ 900 Instructions For Use Manual preview
BQ 900
Brand: Haag-Streit Pages: 18
Haag-Streit IM 900 Instruction Manual preview
IM 900
Brand: Haag-Streit Pages: 20
V-TEK PT-55 Quick Start Manual preview
PT-55
Brand: V-TEK Pages: 2
V-TEK PT-55 User Manual preview
PT-55
Brand: V-TEK Pages: 112
EarthQuaker Devices The Wave Transformer Manual preview
The Wave Transformer
Brand: EarthQuaker Devices Pages: 21
J.P. SELECTA 3000974 Instruction Manual preview
3000974
Brand: J.P. SELECTA Pages: 32

Brands by name

Popular brands

Load more brands