Planar WeatherBright LC3251, Product Manual

Page: 28 / 44

LC3251 / LC4751 Product Manual 28
Function Function
Type
Default
Value Description ASCII Command Value/
Range Possible Responses
Front Fan
Speed Set/Get 50 Set the speed of the front cooling fans when they are in
manual mode OP front.fan.speed 30-100 Front cooling fan speed set to XXX[CR]
XXX = Fan speed 30-100
Temperature
Sensors Get Read the values of the internal temperature sensors.
Returns value at all 3 sensors OP temperature.c Electronics: XX deg C[CR]
Intake air: XX deg C[CR]
Top chassis: XX deg C[CR]
XX = Temperature
Get Thermal
Set Points Get Returns the upper and lower thermal set points OP temp.setpoint Over temp limit 1: XXX deg C[CR]
Over temp limit 2: XXX deg C[CR]
XXX = Temperature limit
Input Source
Selection Set/Get Set or read primary video input. This input would be
displayed as a priority. If the primary input is missing auto-
search will search for another input. OP select.source VGA
DVI Input set to VGA[CR]
Input set to DVI[CR]
Panel Get Returns the native panel resolution ST panel EX:1366x768 Panel resolution: 1366 x 768 [CR]
Auto Dimming Set/Get ON Controls backlight based off the ambient light sensor OP auto.dimming OFF
ON Auto Dimming OFF[CR]
Auto Dimming ON[CR]
Auto dimming is OFF[CR]
Auto dimming is ON[CR]
Minimum
Dimming Level Set/Get/
Increment/
Decrement
5 Sets the lowest brightness level the display will go when
placed in auto dimming mode OP minimum.dimming.level 1-10 Minimum dimming level set to XX[CR]
Minimum dimming level: XX[CR]
Minimum dimming level set to XX[CR]
Minimum dimming level set to XX[CR]
XX = Dimming level
Motion Sense
Control Set/Get OFF Have panel respond to an external motion sensor. OP motion.sense OFF
ON Motion Sensing OFF[CR]
Motion Sensing ON[CR]
Motion Sensing is OFF[CR]
Motion Sensing is ON[CR]
Motion Sense
Polarity Set/Get High Determines if the motion sense input is active high or active
low. OP motion.sense.polarity HIGH
LOW Motion Sense Polarity set to Active
High[CR]
Motion Sense Polarity set to Active
Low[CR]
Motion Sense Polarity is Active High[CR]
Motion Sense Polarity is Active Low[CR]
Motion Sense
Off Brightness Set/Get 5 Sets the brightness level the display will dim to when no car
is detected OP
motion.sense.off.brightness 1-10 Motion Sense Off Brightness set to XX[CR]
Motion Sense Off Brightness: XX[CR]
Motion Sense Off Brightness set to XX[CR]
Motion Sense Off Brightness set to XX[CR]
Ambient Light Get Returns the value read from the ambient light sensor OP ambient.light 0-4015 Ambient Light: XXXX[CR]
XXXX = Ambient Light