Planar PX2211MW, User Manual

Page: 10 / 32

I
NSTALLAT
I
ON
I
NST
R
UCT
I
ONS
BASE
shock or damage.
Unplug the monitor before removal or installation to avoid electric
Do not give a strong impact to the monitor.It may cause damage.
or damage if it falls or is dropped.
Put the monitor on a stable surface.The monitor may cause injury
with the monitor if it is necessary to return the unit.
please follow the instructions below to remove the stand.Be sure to include the stand
The monitor is supplied complete with a stand.If you prefer to wall mount the monitor,
CAUTION
Ƶ
Ƶ
Ƶ
<
Insta
ll
ation
>
8
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
the monitor flat on a table with front face down.
Install the Stand-Base to the Monitor.
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
the monitor flat on a table with front face down.
Pull up the knob of the screws, and remove the screw and the Stand-Base.
<Stopper pin>
Please stand the monitor and then remove the
stopper pin on the back of the stand slowly while
pushing top face of the stand before you install the
monitor. Careful attention is required as the monitor
is sprung loaded and may expand quickly when
removing it.
Stopper pin
< Remo v e >
Stand-Base
Screw for Stand-Base fixing
The knob of the screw
push down
ķ
ĸ
Ĺ
ķ
ĸ