7
Before you install the driver, remove any previously installed display driver for the display
controller from your system.
To install the driver
1
Log on with administrator privileges. The InstallShield Wizard reports new hardware.
2
Click Cancel. You must run Setup.exe to install the driver.
3
Insert the W2KDXPCI CD and open the CD folder.
4
Double-click Setup.exe.
5
Click Next to proceed and start copying files.
6
If the Digital Signature Not Found message appears, click Yes or Continue to complete
the driver installation.
7
Select Yes, I want to restart my computer now, and click Finish.
To enable the display
1
Log on with administrator priviledges.
2
Right-click the desktop. Select Properties > Settings.
3
Select the display icon.
4
Select Extend my Windows desktop onto this monitor. Click Apply.
5
Click OK.
To change the display properties
Use the Dome tab to change display properties after the Dome EX display is attached to
the Windows desktop. Otherwise, use Properties > Settings tab.
Installing the DX Display Driver
5a
EX-QSUG-1_grey 10/18/05 2:07 PM Page 7
