background image

2

Before You  Begin

Check that your system meets these requirements for installation of the Dome E2, E3, or E5
display system. The Dome E3 display is compatible with either the DX2 or the AX3 board.

Operating System

Windows XP or
Windows 2000 
with Service Pack 4 
or higher

Windows XP or
Windows 2000 
with Service Pack 4 
or higher

Warning
Avertissement 
Avvertenza 
Advertencia 

Warnung

Wear an antistatic heel or wrist
strap when installing the controller
and display to avoid damage to
computer components.

Increasing the PCI Bus Performance
(PCICacheMode registry entry)

On systems with 64-bit PCI slots, use the display
driver to enable write-combining for the display
controller. Enabling this function can improve video
performance on the board by 100% or more.
The results: faster image loads, increased window
and level speed, and enhanced system performance.

For more information, visit www.planar.com.

System Requirements

PCI slot per board 
(64-bit recommended)

50 MB hard disk space

256 MB RAM

CD-ROM drive

Intel Pentium 4/Xeon; AMD 
Athlon 64/K7/XP or compatible 

PCI Express x16 lane slot 

50 MB hard disk space

256 MB RAM

CD-ROM drive

Power supply, 350 watts or greater

EX Display Display Controller

Dome E2

DX2 

Dome E3

DX2 

Dome E5

DX2 

Dome E3

AX3 

EX-QSUG-1_grey  10/18/05  2:06 PM  Page 2

Summary of Contents for Dome E Series













Reviews: