Fixed Disk Timeout
This option enables and sets the duration of fixed disk access inactivity required before the sys-
tem shuts off the disk drive, or it disables Fixed Disk Timeout. The options are: Disabled; 1 min;
2 min; 3 min; 4 min; 5 min; 10 min; and 16 min. The default is Disabled.
CRT
This option is not user accessible. It enables or disables power management of the CRT and flat
panel during system entry into or exit from Standby mode. The default is OFF in Standby.
Standby Timer Reset Events
These options determine whether activity from the specified devices will cause the Standby
Timer to be reset.
Keyboard
This option enables or disables keyboard activity to reset the Standby Timer. The default
is Disabled.
Mouse
This option enables (or disables) mouse activity to reset the Standby Timer, and it selects
the IRQ that the mouse is bound to for that purpose. The options are Disabled;
PS/2 (IRQ12); COM1 (IRQ4); and COM2 (IRQ3). The default is COM1 (IRQ4).
Standby Break Events
This option enables or disables a Standby Break Event for the specified IRQ. A Standby Break
Event allows the system to run at full speed for the duration of the specified IRQ. Note that no
such event is associated with IRQ2.
IRQ
DEFAULT
0
Disabled
1
Auto
3
Auto
4
Auto
5
Disabled
6
Disabled
7
Disabled
8
Disabled
9
Disabled
10
Disabled
11
Disabled
13
Disabled
14
Disabled
15
Disabled
Table 5.1 IRQ Standby Default Table
26
Planar Clean Screen PC User’s Manual
CS Manual LAYOUT#1787 3/9/98 5:33 PM Page 26
