If this device is used in a medical facility, any operating systems or programs
used are required to be in the user’s language.
Power Supply
If you will be using AC power, you will need to use the AC power supply adapter that was
packed with your Clean Screen. If you will be using a Planar mounting stand with batteries, you
will use its power connector.
Power Cord Selection
The Clean Screen AC power supply adapter has been provided with a “Hospital Only” or
“Hospital Grade” type cord and plug. The plug has NEMA 5-15 approval. In the event it
becomes necessary to replace the power cord, it is important to select a “Hospital Only” or
“Hospital Grade” type cord and plug.
Headphones or External Speakers
Please note that when you use headphones or external speakers, the internal speakers are auto-
matically disconnected. You may use headphones or speakers with an impedance of 32–300
Ω
.
Powering Up the Clean Screen PC
Figure 16 – Operating unit with keyboard.
Power On
Once the keyboard, mouse, power, and all peripherals have been connected, use the power
switch located beneath the power-on indicator to power up the unit.
Always power down the unit before you connect or disconnect any peripheral.
14
Planar Clean Screen PC User’s Manual
Flat Panel color
LCD TFT display
ranging from
12.1 inch to
13.8 inches
Push-Button
Push-Button
Brightness
Volume
Control
Control
Hard Disk
Activity Light
Power On
Light
Multimedia
Multimedia
CS Manual LAYOUT#1787 3/9/98 5:33 PM Page 14
