Construction and control interface
Following elements are located on the front side of the device (from left to right):
Following connectors and elements are located on the
backside of the uni
t (from left to right):
7
Nr.
Element
1
Mains switch (for each amplifier module)
2
Control-LED Power ON for each amplifier module
3
Input Gain Control
4
Signal-LED
Signal: -24dB to -6dB
Red Clip/Limiter
5
Control-LED Mains connected (lights up if min. one amplifier module is switched on)
Nr.
Element
1
XLR Input symmetric signal
2
XLR Out symmetric signal (signal pass through
3
Ground-Lift-Switch
4
Air ventilation fan (warm air is exhausted through the front)
5
Speakon® female connector (connecvtion 1+/1-)
6
Speakon® female connector (connection 2+/2-)
7
Mains connector 16A Powercon® IN
8
Blind cover
(for optional discrete mains connection of Amplifier module 2 with Powercon® IN
6 5
4 3 1 2 3 1 2
4 5 6 7 8
1
2 3 4 5 4 3 2 1
USER MANUAL PowerPac 5002
© PL-Audio GmbH & Co.KG | Siegener Straße 6 | 57482 Wenden | www.pl-audio.de Version: October 2021 V 1.0
