Connection example stereo fullrange to passive fullrange tops:
11
Mixing console
XL
R
L
/R
Speakon®
2-pol
Speakon®
2-pol
Signal flow (from mixing console to speakers):
XLR Out L/R mixing console to Input A/B on the PowerPac 5002
Speakon® Block 1 to Fullrange-Topteil L (1+/1-)
Speakon® Block 2 to Fullrange-Topteil R (1+/1-)
XLR Thru A/B for additional components eg amplifier, active speakers
,…
PowerPac 5002
Fullrange R
w. integrated
X-Over und
min. 8Ohm
In the example above, the PowerPac 5002 supplies up to two tops (or monitors) with an integrated crossover and a
nominal impedance of 8 ohms (2500W) per amplifier block. The signal assignment to the midrange and tweeter in
the tops / monitors is done by a crossover built into the tops / monitors. In the example above, the Thru A / B could
be passed on to a further power amplifier with connected loudspeakers or active loudspeakers. In this case, please
note that the signal is looped through directly without any level adjustments or EQ-ing.
Eg. to additional amplifier for eg
sidefill or front fill or to active
speakers
XLR
USER MANUAL PowerPac 5002
Fullrange L
w. integrated
X-Over and
min. 8Ohm
Fullrange L
w. integrated
X-Over and
min. 8Ohm
Fullrange R
w. integrated
X-Over und
min. 8Ohm
© PL-Audio GmbH & Co.KG | Siegener Straße 6 | 57482 Wenden | www.pl-audio.de Version: October 2021 V 1.0
