Controls of the PSA10
2 keys (↓↑ and E) for adjusting the switch points, switch-back
points and additional functions
4-digit digital display
LED backlight to indicate switch points
(red = actice / green = inactive)
Function of keys:
•
Im Menü absteigen
•
Wert vergrößern
•
Wird die Taste länger gedrückt, erfolgt ein Schnelldurchlauf der Parameterwerte
•
Auswahl Menüpunkt
•
Wert bestätigen
Digital display
Once the power supply has been switched on, the device briefly flashes "EdS", and then begins to
show the actual pressure.
To check the unit of measurement being used for the pressure indication, press the right-hand key.
Depending on the setting, bar, PSI or MPA will be shown
If the actual pressure exceeds the instrument's nominal pressure it can no longer be displayed. The
nominal pressure flashes in the display. As a result, when the menu point Max Value (Hi) is selec-
ted, the value of the highest measured pressure which has been stored flashes until the instrument is
reset by “reset Min-/Max-value” (re.HL) or “reset” (rES).
If the actual pressure is less than 0.6 % of the nominal range, 0 bar is displayed.
PSA10 Instruction manual 05/2018
page 5
