~
108
~
E
40
DEGREE ANGLE
F
C
OVER
of the drain pump filter
5.
Press the double-sided adhesive tape on the four sides on the bottom of the
appliance (
H
) to fix the bottom cover to the bottom of the appliance firmly; see
below,
fig. 4
.
F
C
OVER
of the drain pump filter
G
A
DJUSTABLE FOOT
H
B
OTTOM OF THE APPLIANCE
:
➢
press the adhesive tape of the bottom cover firmly in place.
2.6 Connection of the water inlet hose
The appliance must not be connected to the mixer tap of an unpressurised water
heater.
Check the connections for leaks by turning the tap on completely.
If the water inlet hose is too short, replace it with a suitable length of a pressure-
resistant water inlet hose (1000 kPa/min).
Check the water inlet hose regularly for brittleness and cracks and replace it if
necessary.
Do not use a water connection the water of which is warmer than 50
0
C.