31
Item
Description
Time difference
Configures the time difference. Set the same time difference
to match your computer. If unsure, consult your IT manager.
SNTP
Click the [ON] check box to retrieve Date and Time
information from the SNTP server and set the following items.
SNTP Server Address
Configures the SNTP server address in IP format.
• The address allows an IP address or domain name if a valid
DNS server is configured in
Network Settings
. The host or
domain name can be up to 255 characters.
Cycle
Configures the interval when Date and Time information from
the SNTP server should be retrieved (
hour:minute
).
Click the
[Apply]
button to save the settings.
• The new configuration settings are activated after restarting the
network connection. When the configuration settings change, you must restart
the network connection. You can restart the network connection from
Network
Restart
on the main menu(
&
41
).
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
• Once you turn off AC power or the projector goes into SAVING mode
(
&
SETUP menu
in the
Operating Guide
), the current date and time setting is
reset.
• To enable the SNTP function, the time difference must be set.
• When SNTP is enabled, the projector will retrieve Date and Time information
from the time server and override other time settings.
• The internal clock’s time may not remain accurate. Using SNTP is
recommended to maintain accurate time.
NOTE
3.1 Projector Web Control - Date/Time Settings (continued)
3. Web Control