manualshive.com logo in svg

PJLink IN5132, Network Manual, Page: 15 / 66

Share
Download
PJLink IN5132 Network Manual Download Page 15

15

2. Network Presentation

The projector can display or play back computer screen images and audio that 

are transmitted through the network. This Network Presentation feature will help 

you make presentations and conduct conferences smoothly.

2. Network Presentation

To start a Network Presentation, select the 

LAN

 port as the input source on the 

projector and click the Starting Capture button on "LiveViewer".

"LiveViewer" functions are model dependent. If you want to use the latest version of 

"LiveViewer", reference the group item in "LiveViewer" User's Manual. This model is 

in the 

E

 Group.

To present over the network, a proprietary software application, "LiveViewer", is 

required. 

You can download it from the InFocus website (www.infocus.com/support). For 

details about this feature, and for instructions to install "LiveViewer", refer to the 

"LiveViewer" manual.

Wired LAN

Wireless LAN

• When the screen resolution of your computer is larger than specified, 

the computer image will be shrunk to the size listed below before it is 

transferred to the projector:

IN5132, IN5142:

 1024 x 768 (XGA)

All other models:

 1280 x 800

The transferred image will be displayed smaller on the projected screen even if 

the projector resolution is larger than above.

NOTE

Summary of Contents for IN5132



































































Reviews:

No comments