11
1. Connection to the network
1.4 Manual network connection setting - Wireless LAN -
Using the optional USB wireless adapter on the projector enables the projector
and computer to communicate in both Ad-Hoc and Infrastructure modes.
This section explains how to set up a wireless LAN connection manually.
1.4.1 Preparation for wireless LAN connection
* Ad-Hoc is a LAN communication method that does not require an access point
to communicate.
* Infrastructure is a LAN communication method that requires an access point to
communicate. If the equipment exists, this mode is most efficient.
If communicating with an existing network, consult with your network
administrator.
Fig. 1.4.1.a Without an access point communication (Ad-Hoc)
Fig. 1.4.1.b With an access point communication (Infrastructure)
First, insert the USB wireless adapter into one of the
USB TYPE A
ports.
(
&
Connecting with your devices
in the
Operating Guide
)
Then, set up the computer for wireless communication.
When the computer comes with a built-in IEEE802.11b/g/n wireless LAN device,
enable it and disable other network connections. If a wireless LAN device is not
built into the computer, connect an IEEE802.11b/g/n wireless LAN device and
install the device driver. For details, refer to the computer and the wireless LAN
device's users' guides.