PJLink DLP MP-WU9101B User Manual Download Page 69

Page: 69 / 81

►Before caring, make sure the power cord is not plugged in,

and then allow the projector to cool sufficiently. The care in a high temperature

state of the projector could cause a burn and/or malfunction to the projector.

►Never try to care for the inside of the projector personally. Doing is so

dangerous.

►Avoid wetting the projector or inserting liquids in the projector. It could result in

a fire, an electric shock, and/or malfunction to the projector.

• Do not put anything containing water, cleaners or chemicals near the projector.

• Do not use aerosols or sprays.

WARNING

►Take right care of the projector according to the following.

Incorrect care could cause not only an injury but adverse influence such as

discoloration, peeling paint, etc.

►Do not use cleaners or chemicals other than those specified in this manual.

►Do not polish or wipe with hard objects.

NOTICE

►Do not directly touch the lens surface with hands.

CAUTION

Turn the projector off, and unplug the power cord. Allow the projector to cool

sufficiently.

After making sure that the projector is cool adequately, lightly wipe with gauze

or a soft cloth.

If the projector is extremely dirty, dip soft cloth in water or a neutral cleaner

diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a

soft, dry cloth.

Incorrect care could have adverse influence such as discoloration, peeling paint,

etc.

Caring for the cabinet and remote control

Maintenance

Summary of Contents for DLP MP-WU9101B


















































































Search results

Summary of Contents for DLP MP-WU9101B

Reviews:

Related manuals for DLP MP-WU9101B

Brands by name

Popular brands

PJLink DLP MP-WU9101B, User Manual

Search results

Summary of Contents for DLP MP-WU9101B

Reviews:

Related manuals for DLP MP-WU9101B

Brands by name

Popular brands