PJLink DLP MP-WU9101B User Manual Download Page 20

Page: 20 / 81

►Do not connect the projector to a power supply while no lens

unit is attached to it.

►Use extra caution when connecting the power cord, as incorrect or faulty

connections may result in fi re and/or electrical shock.

• Do not touch the power cord with a wet hand.

• Only use the power cord that came with the projector. If it is damaged, consult

your dealer to get a new one. Never modify the power cord.

• Only plug the power cord into an outlet whose voltage is matched to the power

cord. The power outlet should be close to the projector and easily accessible.

Remove the power cord for complete separation.

• Do not distribute the power supply to multiple devices. Doing so may overload

the outlet and connectors, loosen the connection, or result in fi re, electric shock

or other accidents.

• Connect the ground terminal for the AC inlet of this unit to the ground terminal

of the building using an appropriate power cord (bundled).

• This product is also designed for IT power systems with a phase-to

phase voltage of 220 to 240 V.

WARNING

NOTICE

5. Connecting the projector to your PC and switching to “׀” to

turn on the power

POWER indicator turns to red, which means the projector is in standby mode.

LAN

OUT

SDI

COMPUTER IN 2

REMOTE

CONTROL

HDBaseT

HDMI 1

DVI-D

HDMI 2

CONTROL

B/Cb/Pb

G/Y

R/Cr/Pr

COMPUTER IN 1

12V OUTPUT

(OPTION)

HDBaseT

DVI

Setting up

Summary of Contents for DLP MP-WU9101B


















































































Search results

Summary of Contents for DLP MP-WU9101B

Reviews:

Related manuals for DLP MP-WU9101B

Brands by name

Popular brands

PJLink DLP MP-WU9101B, User Manual

Search results

Summary of Contents for DLP MP-WU9101B

Reviews:

Related manuals for DLP MP-WU9101B

Brands by name

Popular brands