31
Operating
KEYSTONE: allows you to adjust the vertical and
horizontal keystone.
PERFECT FIT: allows you to adjust each of the screen
corners and sides to correct the
distortion.
WARPING: allows you to project an image on several
types of screen.
• The menu or dialog will automatically disappear after several seconds
of inactivity. Press the
GEOMETRY
button again, or point the cursor at EXIT in
the dialog and press the ►or
ENTER
button to end the operation and close the
menu or dialog.
NOTE
To correct the distortion of projected screen, you can select one of three options,
KEYSTONE, PERFECT FIT, and WARPING. First press the
GEOMETRY
button
to display the GEOMETRY CORRECTION menu, and point at one of the items
with the ▲/▼ buttons.
Correcting the distortion
Then follow the procedure shown below for the item you selected.
Use KEYSTONE / PERFECT FIT / WARPING for adjustment. When one of them
is selected, other items are not available.
KEYSTONE:
When KEYSTONE is pointed at, pressing the ► or
ENTER
button displays the
KEYSTONE dialog.
1.
Select the vertical or horizontal keystone with the ▲/▼ buttons.
2.
Use the ◄/► buttons to adjust the keystone distortion.
• When the zoom adjustment is set to the TELE (telephoto focus),
this function may be excessive. This function should be used when the zoom
adjustment is set to the full WIDE (wide-angle focus) whenever possible.
• When the horizontal lens shift is not set to the center, this function may not
work well.
• Point at RETURN in the dialog with the ▲/▼ buttons and press ◄ or
ENTER
button to return to the GEOMETRY CORRECTION menu.
NOTE
INFO
NETWORK INTERACTIVE
ASPECT
BLANK
ESC
MENU
RESET
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP
ENTER
FOCUS
-
+
ZOOM
-
+
INPUT
INTERACTIVE
MYBUTTON
1
2
PbyP
MAGNIFY
VOLUME
-
+
GEOMETRY
PICTURE
MUTE
NETWORK
OSD MSG
GEOMETRY
button
