6/18
Power consumption AC:
< 5 VA
Power consumption DC:
< 2 w
9.4 Control circuit
Protection against short circuits:
PTC resistance, Ih = 0.5 A
PTC times:
Response time > 100 ms, release time > 3 s
Release time t
A
:
See section OPERATION
Release time in absence
of power supply t
R
:
< 100 ms
Start-up time t
S
:
< 200 ms
9.5 Output circuit
Output contacts:
1 NO safety contact (17-18)
1 NC auxiliary contact (25-26)
1 CO auxiliary contact (35-36-38)
Contact type:
forcibly guided (17-18)
Material of the contacts:
gold-plated silver alloy
Maximum switching voltage:
230/240 Vac; 300 Vdc
Max. current per contact:
6 A
Conventional free air thermal current I
th
: 6 A
Max. total current
Σ
I
th
2
:
36 A
2
Minimum current:
10 mA
Contact resistance:
≤
100 m
Ω
External protection fuse:
4 A
Maximum switching load:
1380 VA/w
Utilization categories acc. to EN 60947-5-1:
AC-15 (50 ... 60 hz)
U
e
= 230 V, I
e
= 3 A
DC-13 (6 op. cycles/minute)
U
e
= 24 V, I
e
= 4 A
Utilization category acc. to UL 508:
C300
Error signalling output Y14:
type: PNP
Rated operating voltage U
e
:
24 Vdc
Rated operating current U
e
:
10 mA
9.6 Compliance with standards
EN 60204-1, EN ISO 13855, EN ISO 14118, EN ISO 12100, EN ISO 13850,
EN 60529, EN 61000-6-2, EN 61000-6-3, EN 61326-1, EN 60664-1, EN 60947-1,
EN IEC 63000, EN ISO 13849-1, EN ISO 13849-2, EN 62061, UL 508, CSA C22.2
no. 14, GB/T14048.5-2017
9.7 Compliance with directives
Machinery Directive 2006/42/EC, EMC Directive 2014/30/EU, RohS Directive
2011/65/EU.
10 SPECIAL VERSIONS ON REQUEST
Special versions of the device are available on request.
These special versions may differ substantially from the indications in these operating
instructions.
The installer must ensure that he has received written information regarding the use
of the special version requested (see paragraph SUPPORT).
11 DISPOSAL
At the end of its service life, the product must be disposed of properly, according
to the rules in force in the country in which the disposal takes place.
12 SUPPORT
The device can be used for safeguarding people’s physical safety, therefore in case of
any doubt concerning installation or operation methods, always contact our technical
support service:
Pizzato Elettrica Srl
Via Torino, 1 - 36063 Marostica (VI) - ITALY
Tel39.0424.470.930
E-mail [email protected]
www.pizzato.com
Our support service provides assistance in Italian and English.
13 EC CONFORMITY DECLARATION
I, the undersigned, as a representative of the following manufacturer:
Pizzato Elettrica Srl - Via Torino, 1 - 36063 Marostica (VI) – ITALY
hereby declare that the product is in conformity with whatever prescribed by the
2006/42/EC Machine Directive. The complete version of the present conformity
declaration is available on our website www.pizzato.com
Marco Pizzato
DISCLAIMER:
Subject to modifications without prior notice and errors excepted. The data given in this sheet are accurately
checked and refer to typical mass production values. The device descriptions and its applications, the
fields of application, the external control details, as well as information on installation and operation, are
provided to the best of our knowledge. This does not in any way mean that the characteristics described
may entail legal liabilities extending beyond the “General Terms of Sale”, as stated in the Pizzato Elettrica
general catalogue. Customers/users are not absolved from the obligation to read and understand our
information and recommendations and pertinent technical standards, before using the products for their
own purposes. Taking into account the great variety of applications and possible connections of the device,
the examples and diagrams given in the present manual are to be considered as merely descriptive; the
user is deemed responsible for checking that the specific application of the device complies with current
standards. This document is a translation of the original instructions. In case of discrepancy between
the present sheet and the original copy, the Italian version shall prevail. All rights to the contents of this
publication are reserved in accordance with current legislation on the protection of intellectual property. The
reproduction, publication, distribution and modification, total or partial, of all or part of the original material
contained therein (including, but not limited to, texts, images, graphics), whether on paper or in electronic
form, are expressly prohibited without written permission from Pizzato Elettrica Srl.
All rights reserved. © 2022 Copyright Pizzato Elettrica
