pag. 3
CHARACTERISTICS:
The CNV510-PBUS-RTU-A is a PROFIBUS Slave
Modbus Master Converter.
It allows the following characteristics:
Up to 512 bytes in reading and 512 bytes in writing;
Triple isolation between Modbus - Power Supply, Modbus - Ethernet, Power Supply – Ethernet;
Two-directional information between Modbus bus and PROFIBUS bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8..19V AC or 8..35V DC (Maximum consumption at 24V: 4 W / VA);
Wide environment conditions: 0..45°C, humidity 35..95 uR%;
Serials Protocols supported:
o
Simple ASCII Protocol;
o
Simple Binary Protocol;
o
Modbus;
o
JBUS.
CONFIGURATION:
You need Software
SW67561
on your PC in order to perform the following:
Define the parameter of the Profibus line;
Define the parameter of the Modbus line;
Define the data to Read in Modbus and where to map these information in the Profibus array;
Define the data to Write in Modbus and where to take the information in the Profibus array;
Update the device.
Summary of Contents for CNV510-PBUS-RTU-A
Page 4: ...pag 4 MECHANICAL DIMENSIONS...
Page 5: ...pag 5 EXAMPLE OF CONNECTION...
Page 6: ...pag 6 CONNECTION SCHEME...
Page 7: ...pag 7 POWER SUPPLY...
