Pixsys CNV510-PBUS-RTU-A, User Manual

Page: 23 / 32

pag. 23
UPDATE VIA UDP:
By pressing the “ Update Device ” button, it is possible to load the created Configuration into the device; and also the Firmware, if necessary.
If you don’t know the actual IP address of the device, please follow this procedure:
Turn OFF the Device;
Put Dip2 of ‘Dip-Switch A’ in ON position;
Turn ON the device
Connect the Ethernet cable;
Insert the IP “ 192.168.2.205 ”;
Select which operations you want to do;
Press the “ Execute update firmware ” button to start the upload;
When all the operations are “OK” turn OFF the Device;
Put Dip2 of ‘Dip-Switch A’ in OFF position;
Turn ON the device.
At this point the configuration/firmware on the device is correctly updated.
If you know the actual IP address of the device, please follow this procedure:
Turn on the Device with the Ethernet cable inserted;
Insert the actual IP of the Converter;
Select which operations you want to do;
Press the “ Execute update firmware ” button to start the upload;
When all the operations are “OK” the device automatically goes at Normal Mode.
Figure 10: “Update via UDP” windows