PiXORD PL721, User Manual

Page: 53 / 74

PL721 User’s Manual
4) To delete a frame that is no longer needed but was previously saved, click on
the unwanted frame and click Delete button. The frame will disappear after a
while.
5) To delete multiple frames that are not yet saved, directly click the Refresh
button instead of deleting them individually. The Refresh button will
automatically clears all unsaved frames.
4.4.2 Video Tab
The Video tabbed pane sets the video recording trigger method to use when
motion is detected by the Camera. The four methods available for selection are
Period, Schedule, Motion, and GPIO Input, each of which can be set up with
user scheduled recoding time and duration, as well as defining the video record
file target destination.
Period: This method will trigger the Camera video surveillance/recording
operation for a defined duration (in seconds) whenever motion is
detected. The video record may be provided to host by E-mail/FTP,
stored in the SD card, Remote Disk as selected or through all of them.
Figure 4-21 Video Recording with “Period” Method Selected