PiXORD PL721, User Manual

Page: 12 / 74

Chapter 2
6 •••• Installation and Setup PL721 User’s Manual
2.2 Configuring and Finding Camera via Software
You could find CAM FINDER utility from the attached Software Package CD.
The CAM FINDER is used to find and configure network cameras on the LAN.
This utility is useful for conveniently configuring the network settings of the
device, or for finding a device once the network settings have been modified.
To install the
CAM FINDER , from the Software Package CD, select CAM
FINDER, then follow the instructions to complete the installation.
NOTE
1. In order to ensure CAM FINDER utility has the best compatibility with Camera,
kindly please goes to the PIXORD website for the latest version downloading.
2. In order to ensure Camera will be assigned IP Address properly, please confirm
the following things.
Always consult your network administrator in order to avoid using a
previously assigned IP address.
Check if the Camera is powered on and correctly connected to the network.
In order to connect to the Web-based user interface of the camera, the host
PC must be in the same subnet. For more information about subnets, please
consult your network administrator.