PiXORD PL721 User Manual Download

Page: 30 / 74

PL721 User’s Manual

4.1.4 Maintenance Tab

Figure 4-7 “Maintenance” Tabbed Pane

The

Maintenance

tabbed pane allows you to upgrade the firmware with the

latest version and to restore the Network Camera settings to factory default.
Where

Upgrade Firmware:

Download the latest firmware file from the website by
executing the following steps

1) Click the

Browse

button to access and select the

appropriate firmware file from its folder.

2) Click the

Upgrade

button. The Network Camera will

then start to upgrade the existing firmware. When
upgrade is completed, the Camera will reboot
automatically.

Upload Own Logo File:

Prepare and save the Logo Image file in the PC. Then

Follow the below steps to replace Web UI Logo with it.

1) Click the

Browse

button to access and select the Logo

Image file from the PC.

Download and save the latest
firmware in the PC
Click here to browse and select it.

Summary of Contents for PL721











































































Search results

Summary of Contents for PL721

Reviews:

Related manuals for PL721

Brands by name

Popular brands

PiXORD PL721, User Manual

Search results

Summary of Contents for PL721

Reviews:

Related manuals for PL721

Brands by name

Popular brands