-
03
-
-
04
-
Do not disassemble. Should repairs become necessary, this product must be
sent to an authorized maintenance center.
Always keep this product dry. Do not use in rain or in damp conditions.
Keep out of reach of children.
Do not use the flash unit in the presence of flammable gas. In certain
circumstance, please pay attention to the relevant warnings.
Do not leave or store the product if the ambient temperature reads over 50℃.
Turn off the flash trigger immediately in the event of malfunction.
Observe precautions when handling batteries
Use only batteries listed in this manual. Do not use old and new batteries or
batteries of different types at the same time.
Read and follow all warnings and instructions provided by the manufacturer.
Batteries cannot be short-circuited or disassembled.
Do not put batteries into a fire or apply direct heat to them.
Do not attempt to insert batteries upside down or backwards.
Batteries are prone to leakage when fully discharged. To avoid damage to the
product, be sure to remove batteries when the product is not used for a long
time or when batteries run out of charge.
Should liquid from the batteries come into contact with skin or clothing, rinse
immediately with fresh water.
Warning
CH
/OK
Channel
Setting Button
GR Group Setting Button
Select Dial
Hot Shoe Camera
Connection
LCD Panel
Names of Parts
Transmitter
Power Switch
--ON (Power On)
--OFF (Power Off)
AF Assist Beam Switch
--ON(AF Assist Beam outputs)
--OFF(AF Assist Beam do
not output)
Status Indicator Lamp
--LED Red Color Lamp
TEST Trigger Button
Micro USB Port
PC Sync Socket
Battery
Compartment
Single Hot Shoe
Camera Flash
Connection
(only triggering)
Body
MODE Mode Selection Button
