Setting the Transmitter
ST-III T-S
Operation Method 2
Function
(under normal status) Enter CH settings;
(under settings) Confirm and back to normal status
Control the ON/OFF of modeling flash
Enter C.Fn custom settings
Switch the Operation Methods (Method 1/Method 2)
Set POWER/FEC amount
Select all the group
(under normal status) Switch the <
Group>mode
(TTL/M/OFF)
Function
Set <
Group>
Set the channel amount
Adjust the group’s POWER/FEC amount
Operation
Short press
Double-click
Long press for 2 seconds
Long press for 5 seconds
Short press
Long press for 2 seconds
Short press
Status
Normal
Set the channel
Set the group
TTL/M Mode
Button
CH/O
K
GR
MODE
Select Dial
-
19
-
-
20
-
Setting the Transmitter
Function
(under normal status) Enter CH settings;
(under settings) Confirm and back to normal status
Control the ON/OFF of modeling flash
Enter C.Fn custom settings
Switch the Operation Methods (Method 1/Method 2)
(under PTH status) Set power/times /hz
(under normal)Control the <
Group>'s ON/OFF
(under PTH status) Back to normal status
Enter PTH status (P-power, T-times, and H-hz)
Function
No (3 groups)/Turning(5 groups)
Adjust the channel amount
Adjust the power amount
Adjust the times amount
Adjust the frequency amount
Operation
Short press
Double-click
Long press for 2 seconds
Long press for 5 seconds
Short press
Short press
Long press for 2 seconds
Status
Normal
Set the channel
Set the power
Set the flash times
Set the flash frequency
Multi Mode (C
.
FN-04-on)
Button
CH/O
K
GR
MODE
Select Dial
