wXa-171-Aurora
Aurora
v2.0.
Copyright © Pivotel IP LLC. All rights reserved.
28
5.5.
GPS/NMEA Repeater
Requires 'superadmin' login.
The Aurora includes a built-in GPS chip and can be configured to repeat the GPS
coordinates over Wi-Fi for use by other applications.
Note: GPS info only is repeated, no other NMEA information is available via the Aurora
built-in GPS chip.
In order for the destination software to properly route the GPS data you must configure
the GPS/NMEA Repeater Parameters in the Aurora User Interface.
Select the checkbox to Enable GPS monitoring and repeating. Once enabled, the GPS
data will be broadcast on UDP Port 11101 and TCP port 11102. These are the standard
port numbers for GPS devices.
Configure the destination software to match these port numbers; or, change this entry
to match the requirements of the destination software.
The data will be broadcast to both the UDP Port and the TCP Port.
It is important to
make sure that these two ports are NOT set to the same port number.
