wXa-171-Aurora
Aurora
v2.0.
Copyright © Pivotel IP LLC. All rights reserved.
16
5.2.
How to Use with Default Setup
We ship the Aurora ready for use with a RedPort-certified compression email and/or web
browsing account; Voice, SMS and GPS Tracking are ready to be enabled for use.
This out-of-the-box configuration works well for the single user. This configuration is also
suitable for the multi-user environment where each person has a separate primary email
and/or web browsing account.
While you have the benefit of email and web compression on each primary account, all
users have unlimited access to the Internet.
5.2.1.
Email and Web Browsing
This default setup allows anyone with a RedPort-certified email account (such as XGate)
or web account (such as XWeb), with a Primary Account username and password, to
use the router, as is, to send and receive email and to browse the Internet.
Here are the basic instructions:
1.
Power the Aurora ON.
2.
On your computer, iOS or Android device, connect to the wireless network
created by the Aurora. The name of the wireless network will be something
like: wxa-171-xxxx, where xxxx may represent the last four digits of the Mac
address of the Aurora.
3.
Once connected to the wireless network, open the RedPort-certified email
program (such as XGate) and go to Settings > Connection > and set the
Connection Type to "Aurora". Click [OK].
4.
Wait for a strong satphone signal.
5. Start an email or a web browsing session.
