© 2019 Pivotal Commware, Inc. All Rights Reserved.
Pivotal Commware® is a registered trademark of Pivotal Commware, Inc.
Page 19 of 32
Echo 5G Web Interface
The Echo 5G Web Interface is the same whether it is on a Smartphone browser or laptop browser.
Connecting to Echo via Web Browser
[1]
Navigate to web address
10.0.0.1
on your phone’s web browser.
[2]
Enter the
last six digits of your Echo 5G’s serial number
as your password. The serial number
can be found on the bottom of the ODU, the back of the IDU, or on the packaging box.
Serial number shown on bottom of ODU
[3]
Once you have entered your password, select
Submit
.
[4]
After submitting your password, the Echo setup will begin. Select
Go
for the Echo to scan and
align with the strongest 5G beam source. Once scanning is complete, you will see the
Setup
Complete
screen and can reset and rescan or view the details of the scan.
[5]
Should you wish to change your settings at any future time, simply go through this process
again. The setup will skip the second and third screens in the image above and take you right to
the
Setup
Complete
page (as the Echo retains the details of your previous scan). You should
select
Reset
for the device to re-scan and re-align.