Pivotal Commware Echo 5G, Installation Manual, Page: 10 / 32

© 2019 Pivotal Commware, Inc. All Rights Reserved.
Pivotal Commware® is a registered trademark of Pivotal Commware, Inc.
Page 10 of 32
[3]
Apply the item(s) to be bonded within thirty minutes.
Installing Outdoor (ODU) and Indoor (IDU, alignment cling)
Components
Make sure you have carefully selected a good window and performed the required glass cleaning before
installing your Echo 5G.
Installing the ODU on the outside of your window
[1]
Remove the strips to expose the adhesive on the rails that are pre-attached to the rail mounting
tool.
[2]
Make sure the rails are level and you are mounting the unit at least four inches from any
window edge. Press it against the outside of your window
– apply force and hold for 30
seconds.
[3]
Run your thumbs up and down the rails, pressing hard for 30 seconds.
[4]
Let the rails cure for one hour before sliding the device on.
Wait 60 minutes
[5]
Slide the ODU onto the rails.