PIVOT CORPORATION
87-3, Shimookada Okada, Matsumoto-shi, Nagano, 390-0313 JAPAN
The meter start-up and stop is differ in
power connection method.
①
Unplug the connector of
Yellow
and
Red
cable
of OBD Cable.
②
Connect
Yellow
cable of OBD Cable to 1-pin
Connector of IGN Cable.
③
Connect to Blade Fuse of IGN Cable into IGN of
the Fuse box.
①
Cut the IGN Cable on the position of the below
and connect to the commercially available Fuse
power supply.
①
Cut the IGN on the position of the below and
connect to the commercially available Fuse power
supply by using bullet terminal.
②
Unplug the connector of
Yellow
and
Red
cable
of OBD Cable.
③
Connect
Yellow
cable of OBD Cable to 1-pin
Connector of IGN Cable.
④
Connect to Blade Fuse of IGN Cable into IGN of
the Fuse box in the engine room.
②
Unplug the connector of
Yellow
and
Red
cable
of OBD Cable.
③
Connect
Yellow
cable of OBD Cable to 1-pin
Connector of IGN Cable.
IGN Cable
＝
Cut Connector
＝
Cut Connector
IGN
(12V with Key ON)
OBD Cable
OBD Cable
OBD Cable
Diagnostic
Monitoring
Connector
To Fuse
box
To Fuse
box
Diagnostic
Monitoring
Connector
Diagnostic
Monitoring
Connector
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Red
Red
Red
Linked to the ECU
Linked to the key switch
Normal
IGN
(using IGN Cable)
(not using IGN Cable)
1
2
3
How to use the Cut Connectors
10 mm
10 mm
When crimping, please
u s e c r i m p e r s o r u s e
pliers to bend and then
solder together.
Peel off of the vinyl
cover at connection.
Peel off of the vinyl
cover at the end of
the product’ s wire.
Wrap around both
wire coils.
4
Close tightly with
cut connector.
5
Insulate with vinyl
tape.
Use the saplyed IGN Cable to get power from IGN.
IGN Cable
Connect IGN Cable
A In case of BMW 3series, etc.
B Using commercially available Fuse power supply
C Directly connect to IGN of the vehicle
1-pin
Connector
Cartridge Fuse
Blade Fuse
Fuse power supply
(commercially available)
Cutting
IGN Cable
Cutting position
Cutting position
Cutting IGN Cable
(DPB-E User’ s Manual Separate sheet As of July, 2015 No.1)
Connect the power cable to IGN
(2.7m)
