9
6
6
7
5
5
4
START
6
5
44
33
2
Bef
o
re
Using
F
eatures
Connecting
The Wires
Installing
The Product
Initial
Settings
Ho
w to
Operate
Speed Pulse
Settings
T
roub
le-
Shooting
Start the Test Run.
(40 km/h, not lower
than 3rd gear)
Engine
Start.
Please carry out the test drive in a safe spacious area away from pedestrians and traffic.
Please make sure to carefully read this manual and understand how to operate the unit before taking a test run.
After having carried out all of the necessary wiring and making settings in “Initial Settings” and
“Speed Pulse Settings” please carry out a Auto-Blipping test.
Press the SET switch to make each setting.
Press the BLP switch.
3
4
1
1
Start Running.
(Setting speed or above.)
2
3
4
Release the clutch.
(Downshift completed.)
Auto-Blipping
ON
Auto-Blipping
OFF
Dot light on
ON
Dot light off
OFF
Set
When the engine starts, Auto-Blipping is OFF. Need to turn ON when it used.
Activate
Depress the Clutch while stepping on the brake, blipping works automatically.
Engine Start.
START
2
Mode Display
2
(Test setting values: A30, t 0.2, S30
)
See page 8 to 9 for details.
3
4
(Make sure the dot blinks.)
1
Depress the clutch pedal
while stepping on the brake.
(When pressing the clutch, the speed
must be not lower than 30 km/h.)
5
6
Auto-Blipping Test
[Reference 2] Example of settings
Car model
Degree of
acceleration
40%
30%
Vitz
Time
0.3
sec
0.3
sec
40%
CR-Z
86/BRZ
0.3
sec
40%
Civic(FD2)
0.4
sec
Car model
Degree of
acceleration
SWIFT(ZC31S)
30%
Time
0.4
sec
COLT
30%
0.4
sec
IMPREZA
(
GRB)
40%
30%
ROADSTER
(
NCEC)
0.3
sec
0.3
sec
• Poor settings of “Initial Settings” and “Speed Pulse Settings” . (See page 7 to 8)
• Poor connection of and . (See page 4 to 5)
• Poor connection of Clutch adapter. (See page 4)
• Not reached at the set speed. (See page 8)
• Auto-Blipping setting value is too low. (See page 8 to 9)
• Not enough to press the Clutch pedal.
6
Gray
Or
ange
[Reference 1] Speed and rpm of each gear
(SUZUKI SWIFT ZC31S
）
1st
1st
1st
2nd
2nd
2nd
3rd
3rd
3rd
4th
4th
4th
5th
5th
5th
0
1000
2000
3000
4000
5000
6000
7000
8000
20
40
60
80
100
120
140
160
180
200
Speed (km/h)
E
n
g
in
e
R
o
ta
tio
n (
rp
m
)
Since the amount of increase in engine rotation changes
depending on the car setting mode, please adjust blipping
settings according to the setting mode.
e.g. HONDA CR-Z 3-mode drive system
NORMAL
1000
rpm
SPORT
ECON
1800
rpm
400
rpm
Auto -Blipping
function operate.
(The rpms increase.)
Depress the clutch
while stepping on
the brake.
Setting mode of
car side
Press
Back to normal display with no
operation for 3 seconds.
A u t o - B l i p p i n g
function operate.
(The rpms increase.)
If Auto-Blipping will
not operate
Check the right if Auto-Blipping will not
work at .
Settings of the car with standard “Acceleration
switching function” .
Note: “Acceleration switching function” is about a standard
function which switches acceleration like SUBARU SI drive and
HONDA 3-mode drive system.
Amount of increase
in engine rotation
Note: You can check the ON / OFF, by checking
the dot lighting or not on normal display.
Change with each
p r e s s i n g o f t h e
BLP switch.
