Piusi P 3.5, Directions For Installation, Use And Maintenance

Page: 12 / 112

12
/112
Installation, use and maintenance
M0352
rev
.01 EN
INTENDED USE 11.
Intended use
The “
PIUSI P 3.5 - PIUSI P 5.5
” dispensing system is designed and
manufactured for the sole purpose of dispensing lubricating oil.
Conditions
of use
The “ PIUSI P 3.5 - PIUSI P 5.5 ” dispensing system must be used in
accordance with the following conditions:
¦ intake air pressure: 3-8 bar;
¦ maximum operating pressure: 150 bar;
¦ make sure that the pump operates within its nominal operating
parameters.
Flammable liquids
and explosive
atmosphere
Unintended use
Do not operate the system for any purpose other than the purpose
described within this manual; all other use is considered “IMPROPER”
and will result in PIUSI S.p.A. disclaiming any responsibility for damage
to property, people, animals or to the system itself.
The system “ PIUSI P 3.5 - PIUSI P 5.5 ” was not designed for dispensing
of diesel, petrol, flammable liquids with flash point <55°C (131°F), or for
operation in environments with potentially explosive atmosphere. The use
in the above mentioned conditions is forbidden.
WARNING