Piusi P 3.5, Directions For Installation, Use And Maintenance

Page: 10 / 112

10
/112
Installation, use and maintenance
M0352
rev
.01 EN
10.
TECHNICAL SPECIFICATIONS
1. MACHINE AND MANUFACTURER IDENTIFICATION
The dispensing system comes with an
identification stamp attached to the pump
and contains the following information:
¦ type;
¦ product ID code;
¦ serial number.
9.
Before installing, always make sure the
type of dispensing system is correct.
WARNING
P 3.5 - ST
F00214000
P 3.5 - 940
F00214020
P 5.5 - ST
F00214010
P 5.5 - 940
F00214030
Compression ratio 3.5:1 3.5:1 5.5:1 5.5:1
Air pressure
3-8 bar
43.5-116 psi
3-8 bar
43.5-116 psi
3-8 bar
43.5-116 psi
3-8 bar
43.5-116 psi
Air intake thread 1/4” G 1/4” G 1/4” G 1/4” G
Oil intake thread 1” G 1” G 1” G 1” G
Oil outlet thread
1/2” G 1/2” G 1/2” G 1/2” G
Flow rate with free outlet
(8 bar)
21,5 l/min
5.7
USgal/min
21,5 l/min
5.7
USgal/min
15,5 l/min
4.1
USgal/min
15,5 l/min
4.1
USgal/min
Pick-up hose diameter - 42 mm - 50 mm
Pick-up hose length 175 mm 940 mm 175 mm 940 mm
Total length
445 mm 1210 mm 445 mm 1210 mm
Retaining ring nut 2” G 2” G 2” G 2” G