Piusi Nala Motors GARDA1, Installation, Use And Maintenance Manual

Page: 17 / 32

17
/124 17
/32
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
ENGLISH (Translated from Italian)
GARDA1 - GARDA2
5 ELECTRICAL CONNECTIONS:
Pumps must be connected to a DC battery or transformer with AMPER over 20A for 12V, and
over 10A for 24V.
6 DUTY CICLE
Pumps are designed only for DISCONTINUOUS USE. Under high pressure operating condi-
tions, (eg. Closed or blocked outlet, excessive delivery circuit length or pressure) , pump can be
subjected to overheating.
Do not use pump for duty cilcles longer than 30 minutes.
Do not run dry pumps for long period. Pumps should run dry only while starting duty cilcle. DAM-
AGE DUE TO RUNNING DRY WORKING ARE NOT COVERED BY WARRANTY.
Brushes average life is approx. 1000 hours under normal operating conditions.
After such a period pump stopping are possible and brushes replacement is requested.
7 APPLICATIONS
Pumps can be applied in many fields, but only and exclusively with mentioned liquids. Pumps
can be used for:
Lubricating oil transfer
Viscous liquids transfer
Non corrosive lubricating oil transfer
7.1 ALLOWED / NON ALLOWED FLUIDS
FLUIDS RELATED DANGERS
ALLOWED
1. engine oil and non corrosive liquids
(Max viscosity 85 cst)
2. diesel (max temperature 80°C)
3. fresh water
NOT ALLOWED
1. petrol / gasoline
2. flammable liquids with PM ≤ 55° C
3. foodstuff liquids
4. corrosive chemical products
5. solvents
FIRE - EXPLOSION
FOODSTUFF CONTAMINATION
PUMP CORROSION –
PERSONNEL INJURY
DAMAGE TO SEALS –