Piusi Nala Motors GARDA1, Installation, Use And Maintenance Manual

Page: 16 / 32

M0239
16
/32
Installation, use and maintenance
EQUIPMENT
MISUSE
Misuse can cause
death or serious
injury
!
Do not operate the unit when fatigued or under the influence of
drugs or alcohol.
Do not leave the work area while equipment is energized or under
pressure.
Turn off all equipment when equipment is not in use.
Do not alter or modify equipment. Alterations or modifications may
void agency approvals and create safety hazards.
Route hoses and cables away from traffic areas, sharp edges, moving
parts, and hot surfaces.
Do not kink or over bend hoses or use hoses to pull equipment.
Keep children and animals away from work area.
Comply with all applicable safety regulations.
Do not exceed the maximum operating pressure or the temperature
of the part with lower nominal value of the system. See Technical
Data in all equipment manuals.
Use fluids and solvents that are compatible with the wetted part
of the system. See Technical Data in all equipment manuals. Read
the manufacturer’s instructions of the fluids and solvents. For more
information on the material, request the safety data sheet (MSDS)
from the distributor or dealer.
Check the equipment every day. Immediately repair or replace worn
or damaged parts only with original spare parts of the manufacturer.
Make sure the equipment is classified and approved compliant with the
standards of the environment where it is used.
Use the equipment only for the intended use. Contact your distribu-
tor for more information.
Keep hoses and cables far from traffic areas, sharp edges, moving
parts and hot surfaces.
Do not bend or over bend the hoses or use the hose to pull the equipment.
TOXIC FLUID OR
FUMES HAZARD
Read MSDS’s to know the specific hazards of the fluids you are using.
Store hazardous fluid in approved containers, and dispose of it ac-
cording to applicable guidelines.
Prolonged contact with the treated product may cause skin irrita-
tion: always wear protective gloves during dispensing.
3 DETAILS
Suitable for transferring oils or viscous liquids
Self-priming
Discontinuous use
Bronze gears
Running dry while starting
4 OPERATING CONDITIONS:
MINIMUM & MAXIMUM TAMBIENT TEMPERATURE:
-20°C and + 60°C max
RELATIVE HUMIDITY 90% max
Above temperature ranges have to be applicated to all pump components to avoid any possible
damage or malfunctioning.