Piusi F00208A00, Instructions For Use And Maintenance Manual

Page: 43 / 208

43/208
EN
In compliance with the 94/9/CEE standards, the pumps carry the following identi-
fication marks:
II 3/3 GD c IIB T135°C
: safety symbol to Din 40012 attachment A.
II 3/3GD: surface equipment used in areas where the presence of gas, vapors or mists
in addition to clouds of combustible powder in the air is unlikely during normal op-
eration both in external and internal areas and, if it does occur, it will only persist for
a short period (ZONE 2).
c: protection by constructional safety (EN 13463-5).
IIB: Excluding the following products: hydrogen, acetylene, carbon disulphide.
T135°C: Class of admitted temperatures. The processed fluid temperature value
must fall within such class range and the user must comply with the instructions
contained in the manual and with the current laws. Furthermore, the user must take
into account the ignition point of the gases, vapors and mists in addition to clouds
of combustible powder in the air existing in the area of use.
MARKINGS AND GENERAL INFORMATION
IDENTIFICATION CODE
D1
E
CODE PUMP
Pump
casing
Diaphragm
air side
Diaphragm
fluid side
Balls Balls seats O-RINGS
F00208P00 PIUSI MP 130 PP HYTREL PTFE PTFE PP PTFE
F00208A00 PIUSI MA 130 ALU NBR NBR NBR ALU NBR
F00208P20 Piusi MP 140 PP HYTREL PTFE PTFE PP PTFE
F00208P10 Piusi MA 140 PP NBR NBR NBR PP NBR
F00208P30 Piusi MP 180 PP HYTREL PTFE PTFE PP PTFE
F00208A10 Piusi MA 180 ALU NBR NBR NBR PPS-V NBR
F00208P40 Piusi MP 190 PP HYTREL PTFE PTFE PP PTFE
F00208A20 PIUSI MA 190 ALU NBR NBR NBR PPS-V NBR