PIUSI SPA DEPUROIL, Use And Maintenance Manual

Page: 7 / 12

6) Install the handle (Pos. 21) to the trolley back (Pos. 22) by means
of the screws (Pos. 14).
ATTENTION
The motors are not of an anti-explosive type.
DO NOT install them where inflammable vapors could be present.
H4
ELECTRICAL CONNECTIONS
DEPUROIL models are equipped with power cable with plug, bipolar
switch and the capacitor wired and installed inside the terminal strip box
of the motor.
The switch has the function of starting/stopping the pump and cannot in
any way replace the main power switch required by the applicable
regulations.
The plug is equipped with a ground terminal and must be connected to a
suitable socket to be properly connected to the ground line of the
electrical network.
ATTENTION
It is the installer’s responsibility to carry out the electrical connection with
respect to the applicable regulations.
Comply with the following (not exhaustive) instructions to ensure a
proper electrical connection.
- During installation and maintenance make sure that power to the
electric lines has been turned off.
- Always close the cover of the terminal strip box before supplying
electrical power, after ascertaining the integrity of the gasket seals
that ensure protection grade IP 55.
I
START-UP AND DAILY USE
I1 GENERAL INFORMATION
- Do not run the pump dry. This can cause serious damage to its
components.