Page 4
For technical questions, please call 1-800-444-3353.
Item 60805
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
5.
Maintain power tools. check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power tool’s
operation. If damaged, have the power
tool repaired before use. Many accidents
are caused by poorly maintained power tools.
6.
Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
Vacuum pump Specific Safety Warnings
1. Avoid overfilling. Do not service air
conditioning systems improperly.
2. Wear ANSI-approved safety goggles
during set up and/or use.
3. Certification is required by law for
technicians opening refrigeration circuit.
4. Use in dry locations only.
5. Do not cover this unit. This Vacuum
Pump gets very hot when in use. Do
not use near combustibles and allow the
unit to cool down completely after using,
and/or before moving or storage.
6. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
7. Do not leave the tool unattended when
it is plugged into an electrical outlet.
Turn off the tool, and unplug it from
its electrical outlet before leaving.
8. This product is not a toy.
Keep it out of reach of children.
9. WARNING: The brass components of this
product contain lead, a chemical known to
the State of California to cause birth defects
(or other reproductive harm).
(California Health & Safety Code
§ 25249.5,
et seq.
)
10. WARNING: Handling the cord on this product
will expose you to lead, a chemical known
to the State of California to cause cancer,
and birth defects or other reproductive harm.
Wash hands after handling.
(California Health & Safety Code
§ 25249.5,
et seq.
)
11. People with pacemakers should
consult their physician(s) before use.
Electromagnetic fields in close proximity to
heart pacemaker could cause pacemaker
interference or pacemaker failure.
In addition, people with pacemakers should:
• Avoid operating alone.
• Properly maintain and inspect to avoid
electrical shock.
• Properly ground power cord.
Ground Fault Circuit Interrupter (GFCI)
should also be implemented – it prevents
sustained electrical shock.
12. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
SAVE THESE INSTRUcTIONS.
Summary of Contents for 3 CFM two stage
Page 1: ......