Page 2
For technical questions, please call 1-800-444-3353.
Item 60805
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Table of contents
Safety .................................................2
Specifications .....................................6
Setup ..................................................7
Operation ............................................7
Maintenance .......................................9
Parts List and Diagram ......................10
Warranty ............................................12
WARNING SyMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMpORTANT SAFETy INFORMATION
General power Tool Safety Warnings
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term ″power tool″ in the warnings refers to your mains-operated (corded) power tool.
Work area safety
1.
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which
may ignite the dust or fumes.
3.
Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
4.
NEVER use this Vacuum pump to vent
refrigerants into the air. It is illegal and
harmful to the environment to do so.
Summary of Contents for 3 CFM two stage
Page 1: ......
