manualshive.com logo in svg

Pitney Bowes DM800 Series, Operator'S Manual

Share
Download
Pitney Bowes DM800 Series Operator'S Manual Download Page 17

SV61162 Rev. C  

1-7

DM800™ Series Digital Mailing System Operating Guide

DJPS/DMPS Power Stacker

WARNING! 

Follow normal safety precautions for all office equip-

ment whenever using the DJPS/DMPS power stacker.

·  Use only Pitney Bowes approved supplies, in particular aerosol dust-

ers. Improper storage and use of aerosol dusters or flammable aerosol 

dusters, can cause an explosive-like condition that could result in a 

personal injury and/or property damage. Never use aerosol dusters 

labeled flammable and always read instructions and safety precautions 

on the duster container label. 

·  To obtain Pitney Bowes supplies, please contact our Pitney Bowes 

Supply Line™. Material Safety Data Sheets can be obtained on the 

web or from our Pitney Bowes Supply Line™. Refer to the 

Pitney 

Bowes Contact Information List

 at the front of this guide for phone 

numbers and web site information.

·  Use the power cord supplied with the machine and plug it into a prop-

erly grounded wall outlet located near the machine and easily acces-

sible. Failure to properly ground the machine can result in severe per-

sonal injury and/or fire.

·  Avoid touching moving parts or materials while the machine is in use. 

Keep hands, loose clothing, jewelry and long hair away from all moving 

parts.

·  Do not remove covers. Covers enclose hazardous parts that should 

only be accessed by properly trained service personnel. Immediately 

report to Pitney Bowes Service any damaged or non-functioning com-

ponents that renders the unit unsafe.

·  Place the unit in an accessible location to allow for proper venting of 

the equipment and to facilitate servicing. 

·  The power cord wall plug is the primary means of disconnecting the 

machine from the AC supply. 

·  Do not use an adapter plug on the line cord or wall outlet.
·  Do not remove the ground pin from the line cord.
·  Avoid using wall outlets that are controlled by wall switches, or shared 

with other equipment.

·  Do not route the power cord over sharp edges or trapped between fur-

niture.

Summary of Contents for DM800 Series



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands