9
Operation
LED Status
Description
Notes
Continuous
light
Double sheet/Jam detect
Can be caused by:
Double sheets
Paper jam
Different paper quality or print
compared to the calibrated set
Reduced paper feeding
capability
Incorrect paper length
(compared to the calibrated
length)
Flashing slow
Misfeed indication
Load/check paper.
If continuous misfeed, clean the
feed rollers (see section 5.1)
Flashing fast
Comes on after the calibration cycle. The
bin sensor that is flashing is incapable of
sensing double sheets but is operational
and still capable of detecting misfeeds.
The other bins are OK and calibrated.
Step # Description
Action
Notes
1
Reduce the total
counter value by 1
set.
Press and release "Counter
reset button".
In offset stacking mode
the stacker will cycle
once.
Step # Description
Action
Notes
1
To zero the total
counter.
Press "Counter reset button" and hold
down for more than one (1) second.
4.4 Bin Indicators
4.5 Correcting counter and stacker position
4.6 Setting the Total Counter to Zero
